Optional Accessories
Board
Here are dedicated boards for 12Lf, L12, D12, D7 series servo actuators.
The mightyZAP linear servo actuator operates by receiving communication commands from various customer's controllers (PC, PLC, Embedded Board, etc.).
If you do not have a controller, you can control actuator by our several different control boards.
All boards have built-in basic programs for immediate use, and also they can be programmed by users.
If you do not have a controller, you can control actuator by our several different control boards.
All boards have built-in basic programs for immediate use, and also they can be programmed by users.
The IR-USB02 is not a controller, but a USB to RS-485 / TTL converter that can be used with a PC.
It is highly recommended to purchase this board when your first purchase of actuators as you can set various parameters, test the motion, update the firmware, and do a simple diagnosis for the actuator on our dedicated Manager software.
It is highly recommended to purchase this board when your first purchase of actuators as you can set various parameters, test the motion, update the firmware, and do a simple diagnosis for the actuator on our dedicated Manager software.
Board Buy Now !
Mounting Solution
See various mounting options for the mightyZAP.
Our actuator can be installed using basic accessories - the hinge and rod-end tip, but we provide more various mounting options for various customer's requirements.
Our actuator can be installed using basic accessories - the hinge and rod-end tip, but we provide more various mounting options for various customer's requirements.
They are common for 12Lf, L12, D12, D7 servo actuators, 12Lb Feedback actuators, 12L/12D limit switch actuator.
Mounting Solution
Buy Now !
Wire
All servo actuators (12Lf, L12, D12, D7 series) will be delivered along with basic 200mm wire harness and we also provide more extension wire options for customer's needs.
Extension Wire | 3Pin TTL/PWM (PT) | Molex Connector (50-37-5033)
* It is an extension wire applicable to the facility, not a 200mm wire included in the standard accessory.
Extension Wire | 4Pin RS-485 (F) | Molex Connector (51065-0400)
* It is an extension wire applicable to the facility, not a 200mm wire included in the standard accessory.
Basic Connector Wire
* 1pc of this wire is already included in the actuator package.
Housings & Terminals
Molex connectors / terminals (Bulk)
Get small qty of Molex connectors & terminals for making your own wire harness.
(1set = for 10pcs of connectors)
Get small qty of Molex connectors & terminals for making your own wire harness.
(1set = for 10pcs of connectors)
Wire Buy Now !
Rod-End Tips
Find several different types of optional rod end tips that can be used according to your needs.
The basic rod end tip provided with the actuator can also be purchased additionally.
Rod-end-Tip Buy Now !
ETC
Here are more miscellaneous accessories such as power gender, and connector cap.
